40mm (1-9/16″) 8 J Rotary Hammer, SDS-MAX Shank 1,100W

HR4013C

40mm (1-9/16″) 8 J • 6.8 – 6.9 kg (14.9 – 15.3 lbs.) • 1,100W

 

 

Features:
  • Powerful 1,100 W motor delivers 8.0 J of impact energy to handle the most demanding applications
  • Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5 m/s²
  • Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
  • Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
  • Lock-on or trigger activation in “Chipping Only” mode with a push button start/stop control
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more control and better accuracy
  • LED service light notifies the user approximately 8 hours before the brushes need to be replaced
  • LED power light indicates switch failure or cord damage
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to minimize gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Depth gauge for increased drilling consistency
  • Double insulated

Standard Equipments:

Standard Equipments:

Depth Gauge, Side Handle, Bit Grease

Features

Specifications:
350

Carbon Brush

Continuous rating input 1,100W
Impact Energy EPTA-Procedure 05/2009: 8 J
Our experimental conditions: 11.4 J
Capacity Concrete (w/ TCT Bit): 40 mm (1-9/16″)
Concrete (w/ Core Bit): 105 mm (4-1/8″)
Blows Per Minute (BPM) 1,450 – 2,900
No Load Speed (RPM) 250 – 500
Sound Pressure Level 92 dB(A)
Sound Power Level 103 dB(A)
Noise K Factor 3 dB(A)
Vibration Level Chiselling Function w/ Side Handle: 4.5 m/s²
Vibration K Factor Chiselling Function w/ Side Handle: 1.5 m/s²
Vibration Level Chiselling Funtion w/ Side Grip: 4.5 m/s²
Vibration K Factor Chiselling Funtion w/ Side Grip: 1.5 m/s²
Vibration Level Hammer Drilling into Concrete: 5 m/s²
Vibration K Factor Hammer Drilling into Concrete: 1.5 m/s²
Dimensions (L x W x H) 479 x 112 x 263 mm (18-11/16 x 4-3/8 x 10-3/8″)
Net weight 6.8 – 6.9 kg (14.9 – 15.3 lbs.)
Power supply cord 5.0 m (16.4 ft)

 
 


Compatible Accessories

Additional information

Main Category

,

Sub Category

Power Type